Advertisement
14. Secure the DIN cable to the vehicle harness
with the wire tie. Secure the wire tie only in the
area shown and not to the yellow SRS wire
harness.
VEHICLE
HARNESS
WIRE TIE
DIN
CABLE
15. Reinstall the console panel to the front console
with the four self-tapping screws you removed
in step 7.
16. Reconnect the negative cable to the battery.
17. Check the operation of the CD/cassette player
as described in the Owner's Manual supplied
with the player.
18. Reinstall the glove box, the center dashboard
lower cover, the rear console, and the driver's
lower dashboard cover.
19. Reset the clock and the radio station presets.
20. Put the CD/cassette player Owner's Manual in
the glove box for future reference.
21. Put the pocket (removed in step 10) in the
vehicle for your customer.
4 of 4
SELF-TAPPING
SCREWS
CONSOLE PANEL
AII 18761 (9709)
1997 American Honda Motor Co., Inc. – All Rights Reserved
Advertisement
