Advertisement
9. Loosen the two screws securing the radio, then
pull the radio out toward you. Unplug the
antenna lead and the 16-pin connector (gray)
from the rear of the radio. If equipped with
keyless entry and/or a security system, unplug
the green connector(s) from the rear of the
radio.
16-PIN CONNECTOR
RADIO
(GRAY)
SCREWS
ANTENNA LEAD
10. Remove the pocket from the console panel
(two self-tapping screws).
CONSOLE PANEL
SELF-TAPPING
SCREW
11. Slide the CD/cassette player into the console
panel, and install the four washer-screws.
CONSOLE PANEL
WASHER-SCREWS
1997 American Honda Motor Co., Inc. – All Rights Reserved
12. Route the 8-pin DIN connector from the
13. Install the radio:
POCKET
(Save for your
customer.)
WASHER-SCREWS
CD/CASSETTE
PLAYER
AII 18761 (9709)
CD/cassette player up and out through the
radio opening.
8-PIN
DIN CONNECTOR
S Plug the 8-pin DIN connector, the 16-pin
connector (gray), and the antenna lead into
the rear of the radio.
S If equipped with keyless entry and/or a
security
system,
connector(s) into the rear of the radio.
S Carefully slide the radio back into the dash,
and install the two screws.
45
RADIO
SCREWS
16-PIN CONNECTOR
(GRAY)
plug
the
green
8-PIN
DIN CONNECTOR
ANTENNA
LEAD
RADIO
BRACKET
3 of 4
Advertisement
