Schumacher PID-200-USB Owner's Manual page 17

PROBLEM
Inverter does not turn on.
REASON
Poor contact at terminals
Fuse is blown.
Inverter may be defec-
tive.
17 •
•
SOLUTION
Check for poor con-
nection to battery or
power supply. Make
sure connection points
are clean. Rock clamps
back and forth for a
better connection.
A blown fuse is usu-
ally caused by reverse
polarity or a short circuit
within the inverter. To
replace, contact a quali-
fied service technician
who will diagnose the
inverter and replace the
fuse(s) with the appro-
priate replacement(s).
See warranty and call
Customer Service
1-800-621-5485 (Hours
7:00 am to 5:00 pm
CST).