Christie DHD800 User Manual page 16

Chapter 2 Setup Procedures
3. Select "Network setting" in the Network menu with the Point
SELECT button, and then the LAN setting screen will appear and selected LAN settings
will be displayed. Adjust each item to the setting environment. Consult your system
administrator about the detailed settings.
Press the Point
adjust, and adjust the figures with the Point
with the Point
You can also enter values by using the on-screen numeric keyboard (p.15).
4. After completing all the settings, select "Set" and press SELECT button. Now, all
procedures have been done. To cancel the adjusted settings, select "Cancel" and press
SELECT button.
You can confirm the LAN settings you have made from "Network information" (p.16). In
such cases that the LAN cannot be connected, see this screen.
DHCP: On
Item Description
DHCP .................... Sets DHCP function On or Off. When you setup the network setting manually, select
"Off". When it is set On, IP address, Subnet, Gateway and DNS are automatically set
according to your network environment *
IP address .............Sets IP address of the projector
Subnet ....................Sets Subnet mask. Normally sets 255.255.255.0
Gateway* 2 .............Sets IP address of the default gateway (Router)
DNS* 3 ....................... Sets IP address of the DNS server.
*1 Set "On" only when the DHCP server is available on your network environment.
*2 Set [255.255.255.255] if the network does not provide the gateway (router).
*3 Set [255.255.255.255] if you do not use the function E-mail alert.
14
buttons to move the red frame to an item where you want to
buttons.
Network setting
buttons and move among the items
* The numerical value is a setting example.
DHCP: Off
.
1
DHD800 Network User Manual
020-000246-01 Rev.1 (08-2010)
buttons and press