Basic Operation - Jensen JMS2212 Operation Manual

JMS2212

BASIC OPERATION

1
4
3
2
8
9
10
11
12
13 14 16 17 15
Power On/Off
Press the POWER button (11) to turn the unit on or off. The unit will resume the last mode
(Tuner, Aux, etc.).
Volume Control
To increase the volume, press the VOL + button (17). To decrease the volume, press the
VOL - button (16). The maximum volume level is "40". While adjusting the volume, the LCD
displays a bar graph and numerical representation of the level.
Mute
Press the MUTE button (18) on the control panel to mute the audio output. Press MUTE again
to restore the audio output to the previous level.
Mode
Press the MODE button (8) on the control panel to select a different mode of operation, as
indicated on the display panel. Available modes include Tuner (AM/FM), SAT (SIRIUS), iPod,
USB and Auxiliary.
JMS2212
NOTE: SIRIUS and iPod
5
Reset
6
50Wx4
The reset button should be activated for the following reasons:
7
• initial installation of the unit when all wiring is completed
• function buttons do not operate
18
• error symbol on the display
Use a ball point pen or thin metal object to press the RESET button, located on the tuner box.
19
20
21
You can recover factory default settings using the RESUME function located on the system
menu. With "YES" flashing, press the MODE button (8) to activate.
Audio Menu
Press the AUDIO button (20) on the control panel to access the audio menu. You can navigate
through the audio menu items by pressing the AUDIO button repeatedly. Once the desired
menu item appears on the display, adjust that option by pressing the VOL +/- buttons (17, 16)
within 5 seconds. The unit will automatically exit the audio menu after five seconds of inactivity.
The following menu items can be adjusted.
Bass Level
Use the VOL +/- buttons to adjust the Bass level range from "-7" to "+7".
Treble Level
Use the VOL +/- buttons to adjust the Treble level range from "-7" to "+7".
Balance
Use the VOL +/- buttons to adjust the Balance between the left and right speakers from "L12"
(full left) to "R12" (full right).
Fader
Use the VOL +/- buttons to adjust the Fader between the rear and front speakers from "R12"
(full rear) to "F12" (full front).
5
®
mode will be skipped if the module/device is not installed.
RESET