Axis Internet Dynamic Dns Service - Axis 231D User Manual

Network dome camera
Hide thumbs Also See for 231D:
Table of Contents

Advertisement

AXIS 231D - Installing the AXIS 231D
14

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service provides a one-click procedure that makes the AXIS
231D available on your local network and over the Internet. On installation, the AXIS
231D will receive a URL (web address), which can then be used to access it. The Network
Dome Camera can be unregistered from the service at any time.
Please visit www.axiscam.net for more details on AXIS Internet Dynamic DNS Service.
Requirements
To use the AXIS Internet Dynamic DNS Service, the following is required:
• A DHCP server connected to the network
• An Internet connection that does not require a proxy server for HTTP access.
Installation Procedure
Please note that this procedure will send the AXIS 231D's IP address, firmware version, product type
and serial number to the Axis Internet Dynamic DNS Service.
No personal information will be transferred.
1. Connect the AXIS 231D to your local network, using a standard (RJ-45) network
cable.
2. Connect the power to the Network Dome Camera.
3. Wait for the Power indicator on the AXIS 231D to show a steady green, whereupon it
will have received a dynamic IP address from a DHCP server on your network.
4. Wait 60 seconds and push the control button on the dome camera once. The Power
indicator will blink amber while it connects to the AXIS Internet Dynamic DNS
service. When the registration process is complete, the indicator will return to steady
green.
5. Visit www.axiscam.net where you will be guided through the remainder of the
installation. Please have the serial number of your product ready and follow the
instructions on the screen.
The serial number/MAC address (S/N) is located on the label on the underside of the AXIS 231D
6. Enter a new password for the root user (administrator).
7. If required, accept the installation of AMC onto your workstation. See AXIS Media
Control (AMC), on page 10 for more information.
8. The installation is now complete, proceed to"Using the Network Dome Camera" on
page 15.

Advertisement

Table of Contents
loading

Table of Contents