Installing The Axis 231D; Mounting The Axis 231D - Axis 231D User Manual

Installing the AXIS 231D

Please observe the following before installing the AXIS 231D Network Dome Camera.
• Handle the camera carefully, avoid striking, shaking, etc. The camera could be damaged by improper handing or
storage.
• Do not disassemble the camera, there are no user serviceable parts inside. To prevent electric shock, do not
remove screws or covers. Also, refer to Axis Warranty Agreement packed with the unit.
• Do not block cooling holes on the bracket. This camera has a cooling fan inside. Blocking the cooling holes may
cause the camera to overheat and malfunction.
• Do not operate the camera beyond the specified temperature. See Technical Specifications, on page 46.
• This product is designed for indoor use or locations where it is protected from rain and moisture. To operate the
camera in these conditions, use the outdoor housing accessories.
• Do not use strong or abrasive detergents when cleaning the casing. Use a mild detergent and wipe gently.
• Never position the camera directly towards the sun or other bright objects. Whether the camera is in use or not,
never aim it at the sun or other extremely bright objects.

Mounting the AXIS 231D

The AXIS 231D Network Dome Camera is supplied with a mounting kit for either exterior
or inset ceiling mounting.
Optional accessories are available for mounting on ceiling, wall, corner and pole, for both
indoor and outdoor use. For more information, please visit the Axis Web site at
http://www.axis.com
Before you begin
If the AXIS 231D is to be mounted in a position where it is difficult to access, it is
recommended that you set the IP address and get the camera up and running before
completing the hardware installation.
AXIS 231D - Installing the AXIS 231D
7