Advertisement
AXIS 205 Quick Installation Guide
One-click Installation
Requirements:
Computer
on a LAN
Network Camera
AXIS Internet Dynamic DNS Service
•
AXIS Internet Dynamic DNS Service is free of charge and is designed to supply you with a static name (DNS name) for
your product instead of a dynamic IP address. More information about AXIS Internet Dynamic DNS Service is available at
www.axiscam.net
•
Please note that this procedure will send the IP address, firmware version, product type and serial number of the AXIS
205 to the Axis Internet Dynamic DNS Service. No personal information is transferred.
•
To remove the DNS name and un-register from the Axis Internet Dynamic DNS Service, open the Setup pages in the AXIS
205, click TCP/IP, Services and check the Remove currently registered DNS name checkbox under the AXIS Internet
Dynamic DNS.
Follow these instructions:
1. Once the network and power cables have been connected (see page 2), wait for the
Status indicator to show a steady green.
2. Now press the control button on the back of the camera once. The Status indicator
will blink green while it connects to the Axis Internet Dynamic DNS service.
3. Wait for the Status indicator on the front of the camera to show a steady green.
4. From a PC connected to the Internet, you have 60 minutes to visit www.axiscam.net
to access the link to the AXIS 205.
5. Enter the serial number of your product and click Proceed.
The serial number (S/N) is on the label
on the back of the AXIS 205
6. Follow the on-screen instructions in the AXIS Internet Dynamic DNS Service.
7. Go to Accessing the AXIS 205, on page 5 for instructions on how to set the password
for the AXIS 205.
Note:
If this installation was not successful, try Manual Installation using AXIS IP Utility, on page 4
AXIS 205
Broadband router providing
automatic IP addressing
Broadband Modem
Page 3 of 6
Internet
Advertisement
