Tuning To A Preset Station; Clock Setting - Akai CDP-280 Operator's Manual

TUNING TO A PRESET STATION

Select the desired station preset number by pressing the REPEAT/M-UP button.
ANTENNA
For FM reception there is a built-in antenna wire at the rear of the unit. Unravel the wire
and move it around to obtain the best reception

CLOCK SETTING

1) Press the POWER button to turn the unit off standby.
2) Press and hold the memory button, the 24Hr will appear on the display. Press the
skip/search
3) Press the MEMORY button ONCE. The Minutes segments
display "0". The Hour segments flash continuously.
4) Press the Skip/Search
hour.
5) Press the MEMORY button again and the minute segments
flash.
6) Press the Skip/Search
minute.
7) Press the MEMORY button once more. The flashing stops
and the time is set.
TO SET THE WAKE-UP TIMER
1) Press the POWER button to turn the unit off STANDBY.
Press MODE button. The TIMER indicator appears on the
LCD and flashes. Press MEMORY button the hour segment
flashes.
2) Press the skip/search
3) Press the MEMORY button again. The hour segment stops
flashing. The minute segment flashes.
4) Press the Skip/Search
up minute.
5) Press the MEMORY button to conclude the setting process. Press MODE / REMAIN
button for Timer Check readout appears the times on the LCD.
6) Press and hold the TIMER button once for timer operation. To disable timer operation
press and hold the TIMER button again. Timer on setting will still be kept in memory
for future occasions when timer operation is desired. (Press the TIMER button again
to activate.)
NOTE: The timer will turn on the function last used as follows:
• Previousty selected radio station
• CD-track 1
or button. Once for select your suitable Hours for the clock.
or button to select the desired
or button to select the desired
or button to select the wake-up hour.
or button to select to wake-
E 8
TIMER
TIMER