Table of Contents
Advertisement
X-Bass
Press X-Bass button to obtain the X-Bass effect as desired "X-Bass" indicator will light
"GREEN". Press this button again the "X-Bass" indicator will disappear and resume to
the normal sound effect.
Random
In CD mode, press "Random" button (on Remote), the display will show "Random" and
CD disc will play in random sequence immediately. Press "Random" again, the "Random"
mark will disappear from display and CD disc will play in normal sequence. Press "Stop"
button to stop the CD.
FM ST.-Mono
In FM tuner mode, slide FM ST-MONO Switch to Mono will force the FM tuner into Mono,
this will reduce the noise in case of very week FM signal. Slide FM ST-MONO Switch back
to ST, FM tuner will in stereo mode.
SLEEP FUNCTION
You can set the unit to switch off after certain period of time as follows:
1. Press POWER to turn on the unit.
2. Press the SLEEP button. The display will show SLEEP and 90.
3. Keep pressing the SLEEP button to change the minute shown in display. You can set
the unit to switch off after 10-90 minutes.
4. Release the SLEEP button to take effect.
5. At any time, you can press SLEEP button the second time to cancel the sleep function.
LISTENING TO RADIO OPERATION
1. Press the POWER button to turn the unit 'ON'.The STANDBY/ON indicator lights'OFF'
and the LCD Backlights'ON'.
2. Select the Tuner function by pressing the TUNER button.
3. Select the desired band (AM or FM) with the BAND button.
4. Tune to the desired radio station by pressing the UP TUNING or DOWN TUNING buttons
on the unit or on the remote control.
5. If you hold the UP TUNING or DOWN TUNING button for more than half a second the
Tuner will begin to automatically scan until a strong signal is found.
6. To turn off the radio, press the POWER button to switch the unit into standby mode.
The STANDBY/ON indicator lights 'RED'.
STORING PRESET STATIONS
1. Tuner either automatically or manually (as described in
steps 4 or 5 above) to the station to be stored.
2. Press the PROGRAM(Memory)/C-adj button once. "PROG"
will flash in the display for 5 seconds. During this time
you must select the desired memory location by pressing
the REPEAT/ M-UP button.
3. Press the PROGRAM(Memory) Button again to store the
station at that location.
4. The unit can store up to 10 FM stations, 10 AM stations.
E 7
Advertisement
Table of Contents
