Table of Contents
Advertisement
REPEAT DISC PLAY
Use the REPEAT button to play an entire disc or one track continuously.
Repeat play of all tracks
1. Press the REPEAT/M-UP button twice. The "REPEAT"
indicator appears in the display.
2. Press the Play/Pause
3. The disc will then begin playing through to the end of the last track. At which point it
will automatically return to the beginning of the first track. This will continue until the
Stop
button is pressed.
4. If the REPEAT/M-UP button is pressed once more, the "REPEAT" indicator will disappear
and repeat play will end. Normal disc play will resume from that point.
5. When the last track has finished playing, the CD play will Stop.
PROGRAMMED DISC PLAY
• It is possible to program the tracks you wish to play in a sequence of your choice. It
is not possible to enter program a disc during playback. Press the Stop
then follow the instructions below.
• It is easier to use the remote control for the following settings, however, you may also
use the controls on the main unit if desired.
ENTERING A PROGRAM
1. Press the PROGRAM(Memory)/C-adj button. "PROG"
flashed and the following information will be display on
the display:
2. Select the first desired track using the Forward
Reverse
Skip Buttons.
3. Press the PROGRAM(Memory)/C-adj button. The first
program selection is now stored in the program memory.
The display will now show:
4. Select the next desired track using the Forward
5. Press the PROGRAM(Memory)/C-adj button. Continue entering tracks in this way
until all the desired tracks are stored (up to 20 tracks).
button.
E 13
and
and Reverse
Skip Buttons.
REPEAT
button first,
Advertisement
Table of Contents
