Table of Contents
Advertisement
► Inserting the SD/MMC card (optional)
In addition to 16MB (128Mbits) built-
in fl ash memory, your camera can
store data on a Secure Digital (SD)
card or a MultiMedia card (MMC).
The supported memory size ranges
from 8MB to 512MB.
To insert a SD/MMC card, gently
push the card as indicated until the
card reaches the end of the slot. Note
that once a SD/MMC card is inserted,
the camera will use the card as the
main storage media. Files stored
in the camera's built-in memory
will become inaccessible until the
SD/MMC card is removed.
The SD card comes with a write-protect switch.
When the write-protect switch is set to the Lock
position, the card will become non-writable. To
ensure that the camera can operate normally,
you should set the write-protect switch to the
Unlock position before inserting the SD card.
To remove the SD/MMC card, gently push the card
until it pops up, and then slide the card out of the
slot.
7
Advertisement
Table of Contents
