Table of Contents
Advertisement
3. Inserting and removing the
SD/MMC card
Inserting the card
1
1
Open the battery/card cover.
2
Insert the card in the direction of
the indication and push it in till the
end of the card plot.
3
Close the battery/card cover.
Removing the card
2
Push in and release the card to
remove it.
1. The camera comes with 14 MB flash memory built inside for storage. If
you do not insert a SD/MMC card, the data will be saved in the built-in
flash memory automatically.
2. The SD card comes with a write-protect
switch. When the write-protect switch is
set to the lock position, the card will
become non-writable. To ensure that the
camera can operate normally, please
set the write-protect unlock position
before inserting the card.
6
S D
Unlock
Lock
Advertisement
Table of Contents
