Inserting The Sd/Mmc Card (Optional) - AIPTEK POCKETCAM 8200 User Manual

► Inserting the SD/MMC card (optional)

In addition to built-in flash memory,
your camera can store data on
a Secure Digital (SD) card or
a MultiMedia card (MMC). The
supported memory size ranges from
8MB to 1GB.
To insert a SD/MMC card, gently
push the card as indicated until the
card reaches the end of the slot. Note
that once a SD/MMC card is inserted,
the camera will use the card as the
main storage media. Files stored
in the camera's built-in memory
will become inaccessible until the
SD/MMC card is removed.

The SD card comes with a write-protect switch. When the write-protect
switch is set to the Lock position, the card will become non-writable.
To ensure that the camera can operate normally, you should set the
write-protect switch to the Unlock position before inserting the SD card.

To remove the SD/MMC card, gently push the card until it pops up, and
then slide the card out of the slot.

This device is compatible with 90% of SD/MMC cards already on the
market. To ensure the SD/MMC card work well with the device, we
recommend that you take the device with you while purchasing new
memory cards.
- 8 -