Table of Contents
Advertisement
General Connection (without PoE)
1. Connect the camera to an Ethernet switch via LAN cable.
2. Connect the power cable from a power unit (not supplied) to a power outlet.
3. Connect the PC to an Ethernet switch via Ethernet cable.
NOTE
l The recommended power supply for this camera is 6 watts minimum.
l When PoE is connected, don't supply 12V DC.
l Spec of DC plug is mentioned below.
16
16
16
1
2
Client PC
(not supplied)
Unit : mm
Ethernet switch
(not supplied)
3
Advertisement
Table of Contents
