Dial A One Touch Number; Erase A One Touch Number; Directory Operation; Menu Structure - AT&T 992 User Manual

0992_CIB_1ATT_FINAL_022105 2/22/04

Dial a One Touch Number

NOTE: For more information about the Auto Speaker
setting, see Turn Auto Speaker On or Off on page 14.
If Auto Speaker is turned on, calls will be dialed using
the method selected in Set Preferred Mode on
page 16. If Preferred Mode is Headset but no headset is
connected, the call will be dialed using the speakerphone.
Press and release a One Touch button.
— OR —
Press and release W, then a One Touch button.
The number is dialed automatically and the number
is displayed on the screen.
If Auto Speaker is turned off, or you want to use
the handset or headset regardless of Auto Speaker
programming:
1.
Lift the handset.
— OR —
Press K
— OR —
Press H and listen for a dial tone.
2.
Press and release a One Touch button.
— OR —
Press and release W, then a One Touch
button.
The number is dialed automatically and
the number is displayed on the screen.
NOTE: If there is a 30-second wait in the dialing
sequence, press any dial pad key or One Touch
button to end the wait and continue the dialing
sequence.

Erase a One Touch Number

To remove a number from a One Touch location, enter
another number in the same location.
To clear a One Touch location and leave it empty, follow the
directions in Store a Number in a One Touch Location
beginning on page 34, but do not enter a number. The
screen display includes
36
4:46 PM Page 36
.
.

DIRECTORY OPERATION

This telephone can store up to 100 names and telephone
numbers in the directory. Names can be up to 16 characters
long and numbers can be 24 digits long. Because directory
entries are stored in alphabetical order, you may wish to
enter names with the last name first in order to maintain
consistency with the information stored automatically
through the Caller ID function of this system.
To enter Directory mode, press D. The screen
displays:
If there are already 100 stored entries, the screen display
includes
the directory, the screen display includes
To exit Directory mode anytime, press D again.

Menu Structure

Use the navigation buttons (<, >, +, -, E) to move
through menu operations. See MENU OPERATION
beginning on page 12 for information about moving
through menus in the screen display. The menu structure
for the directory is below.
VIEW ENTRIES
DIAL
EDIT NAME
DONE
CANCEL
EDIT NUMBER
DONE
WAIT
CANCEL
MAIN MENU
ADD ENTRY
ENTER NUMBER
DONE
WAIT
CANCEL
x
x
If there are no entries in
37