AT&T 992 User Manual page 32

0992_CIB_1ATT_FINAL_022105 2/22/04
TELEPHONE OPERATION
PROBLEM
Difficulty Storing
Numbers in Memory
PROBLEM
Telephone Does
Not Ring
PROBLEM
Problems with LINE
Lights
PROBLEM
A NEW CALL Light
Flashes
56
4:46 PM Page 56
SOLUTION
Make sure you are pressing the correct
sequence of buttons for storing numbers in
One Touch locations. See ONE TOUCH
OPERATION beginning on page 33.
SOLUTION
• Make sure the ringer volume is not turned
off. See Ringer Volume on page 27.
• If there are several other telephones on the
same line, try disconnecting some of the
other telephones. Having too many
telephones connected can also create
problems such as low ringer volume or
impaired sound quality during calls.
SOLUTION
Make sure all plugs are connected properly.
Inspect the line cord connections at the
modular jack(s) and at the telephone. Also
inspect the coiled handset cord connections
at both ends.
SOLUTION
Make sure you have reviewed all of the new
calls in call history. If you have reviewed the
entire call history and the NEW CALL light
remains lit but is flashing, your phone may
have received a false signal from your Voice
Mail service provider. If you have no new
Voice Mail messages follow the directions in
Turn NEW CALL Light Off on page 20.
TELEPHONE OPERATION
PROBLEM SOLUTION
is Displayed • Make sure the battery is installed correctly.
• Replace the battery.
PROBLEM SOLUTION
Speakerphone Does If the other person cannot hear you, make
Not Work sure the MUTE light is off.
PROBLEM SOLUTION
is Set the time and date following the directions
Flashing in Set Time and Date on page 17
—OR—
If you subscribe to Caller ID service, the time
and date will be reset automatically with the
next incoming call.
PROBLEM SOLUTION
This display indicates that a rare memory error
shown
has occurred in the Call History. To prevent
this error from interfering with the normal
in display
operation of the telephone, all of the Call
History was removed. Your product should
now operate normally; no action is required.
57