Owner’s Manual Contents Model Identification ......2 recautions to avoid Possible exPosure to excessive ....microwave energy OnCue Commercial ... 3 mPortant safety instructions Grounding / Earthing Instructions ..5 Installation ......... 5 icrowave Display and Features ......6 Using the Oven Control ....8 Programming the Oven Control ..
Model Identification When contacting ACP, provide product information. Any questions or to locate an authorized service Product information is located on oven serial plate. agent contact ACP, Inc. ComServ Customer Service Record the following information: at: Phone 866.426.2621 / 319.368.8195 or email: commercialservice@acpsolutions.com.
IMPORTANT SAFETY INSTRUCTIONS Recognize this symbol as a SAFETY message WARNING When using electrical equipment, basic safety precautions should be followed to reduce the risk of burns, electrical shock, fire, or injury to persons including the following. 1. READ all instructions before using equipment. 9.
IMPORTANT SAFETY INSTRUCTIONS WARNING WARNING To avoid risk of fire in the oven cavity: Liquids such as water, coffee, or tea are able to be overheated beyond the boiling point without a. DO NOT overcook food. Carefully attend oven appearing to be boiling due to surface tension of the when paper, plastic, or other combustible liquid.
Installation Unpacking Oven Grounding Instructions • Inspect oven for damage such as dents in door or inside oven cavity. • Report any dents or breakage to source of purchase immediately. WARNING Do not attempt to use oven if damaged. To avoid risk of electrical shock or •...
Display and Features Single Pad Programming This feature enables each numbered pad to be programmed for a specific Start Pad use, such as cooking a certain number of potatoes or defrosting and then cooking vegetables or other frozen foods. To use this feature, simply The start pad is used to begin a program the pad to the desired length of time and power level.
Page 7
Display and Features Appears after closing the door. Oven is ready to accept entries Example of display when cooking at variable power. Example of display when cooking at full power. Display when oven sitting idle. Cooking Display DISPLAYS DESCRIPTION 00:00 Displays cooking time.
Using the Oven Control Interrupting Manual Operation Operation To cook food using a specific entered time and power level. Press STOP pad to interrupt or stop operation. 1. Place food in oven. Close door. 2. Press TIME ENTRY pad and enter cooking time. 3.
Programming the Oven Control Programming Items 1. Press and hold pad 1 for approximately 5 seconds. 2. Press pad to be reprogrammed. 3. Enter cooking time by using the number pads. 4. Press POWER LEVEL pad to program level of microwave power if desired.
User Options Changing user options Changing user options Didn’t like an option? Options such as single or double pad programming and beep volume can be Factory settings are marked in bold. changed to suit individual preferences. To change the oven back to the factory To change options: setting, simply select the option that is Press and hold pad 2 for approximately 5 seconds.
Care and Cleaning WARNING To avoid electrical shock which can cause severe personal injury or death, unplug power cord or open circuit breaker to oven before cleaning. Care and Cleaning Clean interior and exterior of microwave oven with mild detergent and damp soft sponge or cloth. Wring cloth or sponge to remove excess water before wiping equipment.
Before Calling for Service WARNING To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time. Only an authorized servicer should remove outer case. Symptom Possible Cause Confirm oven is plugged into dedicated circuit. Confirm oven is on grounded and polarized circuit.