Using The Oven Control - ACP OnCue Commercial Owner's Manual

Using the Oven Control

Interrupting
Operation
Press STOP pad to
interrupt or stop operation.
Canceling Mistakes
• If oven is not cooking, press
STOP pad to clear display.
• If oven is cooking, press
STOP pad once to stop oven.
Open Door
• Press STOP pad to open door.
Manual Operation
To cook food using a specific entered time and power level.
1. Place food in oven. Close door.
2. Press TIME ENTRY pad and enter cooking time.
3. Press POWER LEVEL pad to program level of microwave power if less
than 100% is desired.
• For a lower microwave power, press pads 1 (for 10%),
through 9 (for 90%), or 0 for no microwave energy.
4. Press START pad.
5. At end of cooking cycle oven door opens.
6. Remove food from oven. Door remains open and ready for next item
to cook.
Preprogrammed Pads
To cook food using preprogrammed cooking sequences.
1. Place food in oven. Close door.
2. Press desired pad.
3. Oven begins to cook.
4. At end of cooking cycle oven door opens
Pad Time
1 5 sec.
2 10 sec.
3 15 sec.
4 20 sec.
5 25 sec.
"Factory program times may vary on certain models"
8
Factory Settings
Pad
6
7
8
9
0
Time
30 sec.
35 sec.
40 sec.
45 sec.
60 sec.