Audio Menu; Radio Mode - Jensen MS30 Owner's Manual

MS30

Audio Menu

Press and hold the MODE button (8) to access the audio menu. Press the MODE button
repeatedly to adjust the following settings: BASS, TREBLE, BALANCE, FADER, AS and PS. Use
the VOL +/- buttons (3, 2) to choose a value for each setting. See "Radio Mode" for instructions
regarding the Auto Store (AS) and Preset Scan (PS) features.

Radio Mode

USA/Europe (EURO) Tuning Mode Selection
To change from USA to European tuning mode, perform the following steps:
1. Press and hold the MODE button (8) for 2 seconds to access the system menu.
2. Press the MODE button repeatedly to move through the menu options (BASS > TREBLE >
BALANCE > FADER > AS/PS > USA/EURO). The unit will display USA (if set to USA
frequency tuning mode) or EURO (if set to European frequency mode).
3. With the display showing the current tuning mode, press the VOL - or VOL+ button (2, 3) to
change between USA/EURO.
4. Press the JENSEN power button (1) to confirm your selection.
Frequency Tuning
Press the l<< or >>l button (6, 7) to fine tune the radio frequency.
Channel Seek
Press and hold the l<< or >>l button to seek strong radio frequencies.
Preset Channel Store
To manually store a favorite channel to one of the six preset channels, perform the following
steps:
1. Press the l<< or >>l button (6, 7) to tune to the radio frequency you want to store.
2. Press and hold the FOLDER + or - button (4, 5) to access the preset channel list.
3. Press the l<< or >>l button to select the desired preset channel number (1-6).
4. Wait three seconds and the unit will save the station to the chosen preset channel and
display "SAVED" on the screen.
Auto Store
Press and hold the MODE button (8) to access the audio menu. Press the MODE button
repeatedly until "AS" appears on the display. Press the >>l button to begin the Auto Store function
and store the strongest stations to the preset tuning channels. The unit will automatically perform
a Preset Scan once the Auto Store is complete.
Preset Scan
Press and hold the MODE button to access the audio menu. Press the MODE button repeatedly
until "PS" appears on the display. Press the >>l button to begin the Preset Scan function and
listen to a preview of each stored station.
Preset Channel select
Press the FOLDER +/- buttons (4, 5) to select available preset channels.
7