Advertisement
7.
Support pole on sawhorse. Attach backboard assembly to top pole section (4)
as shown. Install pole cap (38). Use caution; elevator assembly is heavy.
WARNING!
USE CAUTION; ELEVATOR
ASSEMBLY IS HEAVY.
TWO PEOPLE REQUIRED FOR
THIS PROCEDURE. FAILURE TO
FOLLOW THIS WARNING
COULD RESULT IN SERIOUS
INJURY AND/OR PROPERTY
DAMAGE.
8.
Install upper elevator tubes (35) to triangle plates (37) as shown. Install handle
assembly to lower elevator tubes (32) using bolt (29), spacers (36), and nut (31) as
shown. NOTE: Before going on to next step, set adjustable system assembly to
the 10' (3.05 m) setting.
30
4
37
30
29
31
36
36
32
29
29
25
31
32
31
38
37
40
32
31
35
30
37
30
35
03/04
P/N 21463607
Advertisement
