Huffy 21463607 Owner's Manual page 13

Mark pole sections with tape (not supplied) as shown.
2.
4
While maintaining alignment, bounce middle pole section (5)
3.
into top section (4) using a wood scrap as shown until the
top pole no longer moves toward the taped reference mark
on the middle pole. Upright assembly.
IMPORTANT!:
Center
alignment slot
of middle pole
section (5) in a
lower hole of
top pole section
(4) as shown.
NOTE:
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM) MINIMUM
OVERLAP.
5
Tape (Not Supplied)
WOOD SCRAP
(NOT SUPPLIED)
13
6
5
4
03/04 P/N 21463607