Advertisement
Bounce top (4) and middle (5) pole
4.
assembly onto bottom pole section (6)
using a wood scrap as shown. Bounce
until the top and middle pole assembly no
longer moves toward the taped reference
mark on the bottom pole.
IMPORTANT!:
Holes in top (4) and
bottom pole (6) sections
MUST align to correctly
position elevator system
toward playing surface.
NOTE:
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM) MINIMUM
Install bolt (12) through bracket and bottom pole section (6) and secure with nut
5.
(10) as shown. Nut should be tightened until flush (even) with locknuts outer edge.
P/N 21463607 03/04
OVERLAP.
WOOD SCRAP
(NOT SUPPLIED)
12
5
6
6
10
14
4
RODS SHOWN ARE
FOR VISUAL
REPRESENTATION
OF ALIGNMENT
AND ARE NOT
SUPPLIED WITH
THE HARDWARE
Advertisement
