Quick Start Guide - WingScapes BirdCam User Manual

The following steps outline the quickest way to begin using your
BirdCam. We strongly recommend that you read the remainder of this
user's guide before using your new BirdCam.
1. Remove BirdCam from packaging.
2. Remove rear battery compartment door and insert four new
D-cell batteries.
3. Mount the BirdCam so that it is aimed where a bird will
land (preferably within 4 feet). Secure the BirdCam with the
included stretch cords.
4. Adjust the focus ring to match the distance between the
BirdCam and the target.
5. Move the BirdCam's power switch to the ON position.
6. Close the door and secure the latches of the BirdCam.
What Happens Then?
The BirdCam will be in the MODE menu. After a 30-second countdown,
the BirdCam enters AUTO mode using the factory default, EASY-PHOTO
settings. After another 30-second countdown, the BirdCam will watch
for and photograph birds until either the memory is depleted or the
batteries are drained.
6

Quick Start Guide