Auto Mode - WingScapes BirdCam User Manual

AUTO Mode

In AUTO mode, the BirdCam uses an infrared sensor to detect bird
movement, and then automatically takes either a photo or a video clip
(depending on settings chosen in the SETUP menu).
NOTE: A combination of heat and motion are required to trigger
this infrared sensor. The BirdCam's infrared sensor can not detect bird
activity through a pane of glass. If you plan to shoot through a window,
use the TIMELAPSE mode or optional remote control.
Enter AUTO mode:
From the MODE menu, press the +, -, or MODE button until the
display reads: START AUTO >. Press to enter AUTO mode. The
BirdCam will countdown for 30 seconds before watching for birds. (This
gives you time to shut the door and walk away.)
Exit AUTO mode:
Press the MODE button at any time to exit AUTO mode and return
to the MODE menu.
To see which SETUP menu settings take affect in AUTO mode, see the
chart on page XX
36