WingScapes BirdCam User Manual page 15

About the Laser Aiming Device
The BirdCam's laser aiming device will help aim the BirdCam accurately.
When turned ON, the laser projects a red dot where the center of the
image will be.
IMPORTANT: Looking into the laser may be hazardous to the eyes. Do
not stare into the beam or aim at other people. Read the warning label
on BirdCam before operating the laser.
To operate the laser aiming device:
1. With the BirdCam door open, use the MODE button to display
<ENTER SETUP> and press to enter the SETUP menu.
2. With the BirdCam pointed toward its target (and away from
people), press the LASER AIM button. This will activate the laser
aim while you adjust the positioning on the BirdCam.
3. To turn off the laser and re-enter SETUP mode, press the LASER
AIM button again. If the laser is not turned off manually, it will
time-out after 90 seconds.
Mounting the BirdCam
15