WingScapes BirdCam User Manual page 31

YES-KEEP – This option is the default factory value and
simplifies the SETUP menu. The imprint information that
is currently programmed into the BirdCam will appear in a
databar at the bottom of your photos. This selection allows you
to bypass the time, date, and BirdCam name programming
screens.
YES-CHANGE – Select this option and press
time, date, and BirdCam name programming screens.
To change DATE, TIME, and CAMERA NAME:
1. Press + or - to display YES-CHANGE
2. Press to enter SETUP DATE/TIME
3. Press + and – to change values for day, month, year,
hour, minute, and AM/PM
4. Press and to move between day, month, year, hour,
minute, and AM/PM
5. From SETUP DATE/TIME screen, press to enter the
CAMERA NAME screen.
6. Press + and – to change characters in a given position in
the camera name.
7. Press and to move between character positions in
the camera name.
NO – This option will not print a databar with time, date, and
camera name on the bottom of your photos. This selection
allows you to bypass the time, date, and BirdCam name
programming screens.
SETUP Menu
to enter the
31