Timelapse Mode - WingScapes BirdCam User Manual

TIMELAPSE Mode

In TIMELAPSE mode, the BirdCam takes photos or videos at a specific
time interval that you set.
NOTE: The motion-sensor is NOT active in the TIMELAPSE mode.
Enter TIMELAPSE mode:
From the MODE menu, press the +, -, or MODE button until the
display reads: START TIMELAPSE >. Press to enter TIMELAPSE mode.
The BirdCam will countdown for 30 seconds before entering TIMELAPSE
mode. (This gives you time to shut the door and walk away.)
Exit TIMELAPSE mode:
Press the MODE button at any time to exit TIMELAPSE mode and
return to the MODE menu.
To see which SETUP menu settings take affect in TIMELAPSE mode, see
the chart on page XX
38