WingScapes BirdCam User Manual page 22

SETUP Menu
Navigate through the settings:
To navigate between the different settings, use the and buttons.
Change values of a setting:
To change the values in a given setting, use the + and – buttons.
Save your selection:
Once you have selected a certain value in a setting, pressing either
the or button will save that value.
Exit the SETUP menu:
Press the MODE button at any time to exit the SETUP menu and
return to the MODE menu.
NOTE: If the BirdCam is left in this mode without activity for more
than 4 minutes it automatically goes to AUTO mode (which is
initiated by the 30 second countdown)
SETUP Menu
RESET TO EASY?
This setting allows you to reset ALL settings to the factory default.
Three values are available in the RESET TO EASY? setting:
22
Settings and Values Explained
–