Installation Of I-Pilot Controller - MINN KOTA i-Pilot Owner's Manual

I ns Tall aT Io n o f I - P I loT
Con TRo lleR
For PowerDrive V2 and Riptide SP trolling
motors go to page 13.
i-Pilot.Installation.on.
Terrova.and.Riptide.ST.
Trolling.Motors
*i-Pilot will override all CoPilot
functionality. CoPilot remotes will
not function with i-Pilot.
*The Terrova foot pedal is fully
functional and supported when i-Pilot
is installed correctly.
1. Remove all power to the
trolling motor.
2. Remove control box cover
screws and cover using Phillips
screwdriver. (figure 1)
3. If the trolling motor has the
AutoPilot feature, unplug the
AutoPilot control board and
remove it from the control
box. (figures 2 and 3)
INSTALLATION
FIGURE 1
FIGURE 2
FIGURE 3
mi nnkot amot or s.c om mi nnkot amot or s.c om 11