Table of Contents
Advertisement
3. Specify the Save operation required (example,
"Save Single Song").
Use the navigational arrows ( / and /
buttons) to navigate within the two columns
of the display area and select the required
command by combining one element from
each column.
For example, combine "Single" from the left
column with "Song" from the right to specify
"Save Single Song".
If you are using a MIDI file disk, specify "Sin-
gle MIDI File".
4. Press ENTER to confirm the command and open
the File Selector.
The display shows the directory of the songs
present in RAM and the floppy disk directory.
In the example, the instrument's RAM direc-
tory is shown with 2 songs (with generic
names).
If the disk is new (no Blocks present), the di-
rectory will be empty. In the illustrated ex-
ample, a new disk is used.
If the disk is a used one, what appears in the
directory will depend on the contents. One
or more Block files may be present.
5. If necessary, select the Song to save and its des-
tination on disk.
A selected file is shown in negative highlight.
Use the cursor arrows to select a different
file. In the example, Song_02 is selected.
An empty destination is shown as a broken
line. A preselected destination is shown en-
closed by a rectangular frame.
6. Press ENTER.
You'll be prompted to create a new Block. The
name "MAIN" is suggested automatically.
Use the keyboard as the source of alphanu-
meric data to give the block a name.
3
4
5
6
User Guide 2•57
Advertisement
Table of Contents
