Table of Contents
Advertisement
INSERTING NOTES
To create a Score, notes are withdrawn from a
Song track.
1. Press F4 («Get Score»):
2. User the DIAL to select the track to transcribe.
3. Press ENTER to confirm. Wait a few sec-
onds for the score to be generated.
INSERTING CHORD SYMBOLS
Chord symbols correspond to the MIDI 'Text'
event. These are loaded and saved with MIDI
files. Chord symbols can be inserted into a new
Song using the procedure explained on the next
page.
Score Edit - Lyrics mode
1. Press F5 («Chords») to take the cursor to
the chord line (above the staff).
2. Press the soft button G («Go to loc...») to go
to a specific measure:
Specify the measure with the DIAL then press ENTER to
confirm or ESCAPE to cancel.
3. Move the insertion point to the previous or
next note using the soft buttons D («Next
event») and E («Previous event»).
4. Each note is ideally subdivided into 1/16ths.
In addition to a symbol at the beginning of a
note (first 1/16th), you can insert symbols in
one of the 1/16ths which follow. Press F8 to
open the symbol insertion zone:
Insertion of the symbol at the second 1/16th
Insertion of the symbol at the third 1/16th
Insertion of the symbol at the fourth 1/16th
The number shown on the left of the inser-
tion zone indicates the current 1/16th. To
move the insertion point to one of the other
1/16ths, use the soft buttons H («<<1/16»)
and F8 («>>1/16»).
To escape and return to the note, press the
soft button E («Previous event»). To escape
and pass to the next note press the soft but-
ton D («Next event»).
5. Play the chord below the Split Point. The
chord symbol appears, in the following form:
CMaj, Dmin, E7th...
6. If you want to indicate a bass extension, or a
pedal note, press the function button F («Ex-
tension») and play the alternative chord. The
Score/Edit Score 7•23
Advertisement
Table of Contents
