Table of Contents
Advertisement
LOAD GROUP
The Load Group command offers a quick way of
loading a Groups of 8 elements at a time.
Warning: The Group currently in memory is
overwritten by the incoming Group. If, for example,
the User Style Group you are loading contains only
one User Style, all User Styles of the destination
Group currently in RAM will be cancelled and
replaced by the new Group. Be sure that your
Group data are safely saved to Disk or Hard Disk
before proceeding.
Load Group offers the following possibilities:
Load Group Real Perf
Loads a Group of Performances consisting of up
to 8 user-programmed RealTime Performances
to any Real Performance destination.
Load Group User Style
Loads a Group of up to 8 User Styles (and corre-
sponding Performances) to any User Group des-
tination.
Load Group Song
Loads Songs as "virtual Groups" (Song Group 1
and Song Group 2 found in the Disk environment
only). Each virtual group corresponds to the first
8 or second 8 locations of the Song memory. In
fact, in normal conditions when you press the
Song button to select a Song, the song selection
display shows two columns, left and right. The
left column corresponds to the virtual Songs-
Group 1 and the right to Songs-Group 2. This
feature is particularly useful for the WX Series
Songs disks which contain Song Groups contain-
ing up to 8 Songs each.
Load Group Style Perf
Loads a Group of 8 Style Performance banks,
each bank containing up to 8 user-programmed
Style Performances. Unlike other Groups, the
Style Groups cannot be "switched" - they must
be loaded to their original locations in memory.
For example, Group 8 (US. TRAD) cannot be
loaded to any other location in RAM other than
Group 8.
If you attempt to load to a destination other than
the correct one, a user message will inform you
of your error with the following message:
Press ESCAPE to close the user message and
try again, this time selecting the correct destina-
tion.
Disk & Hard Disk 3•11
Advertisement
Table of Contents
