Table of Contents
Advertisement
6. Press soft button F («End phrase») to termi-
nate the verse. The end of the verse is indi-
cated by the "end phrase" symbol 'I'.
Do not write lines consisting of more than 20
characters. This is to avoid the incorrect
syllabisation of words when you are viewing
lyrics in large type. For example, the word
"Ballgame" may syllabize to "Bal-lgame", or
"Ballg-ame" or other, instead of "Ball-game".
7. You can modify a selected syllable by rewrit-
ing it entirely or partially.
To replace one character with another, remain
in Overwrite mode (rectangular cursor). If you
are in Insert mode (cursor in the form of a
vertical line), press note D#2 («INS/OVER»)
to pass to Overwrite mode. Move the cursor
with the DIAL, then insert the new character.
To insert a character without cancelling an-
other, pass to Insert mode. Press note D#2
(«INS/OVER»); the cursor will take the form
of a vertical line. Move the cursor with the
DIAL, then insert the new character. Press
D#2 to return to Overwrite mode.
The «Edit Score» page
CHORDS (F5)
Takes the cursor to the Chords line (above the
staff).
LYRICS (F6)
Takes the cursor to the Lyrics line (below the staff).
NEXT EVENT (D)
Takes the cursor to the next event (note or pause).
PREV. EVENT (E)
«Previous event». Takes the cursor to the previ-
ous event (note or pause).
GO TO LOC... (G)
Takes the cursor to the beginning of the speci-
fied measure. Press soft button G to open the
dialog window:
Specify the measure with the DIAL.
Press ENTER to confirm or ESCAPE to cancel.
>> 1/16 (F8)
Each note greater than a sixteenth ( demisemi-
quaver ) is ideally subdivided into sixteenths; this
button takes the cursor to the next sixteenth. For
example, a quaver (8th) is divided into two 1/
16ths, a crotchet (quarter) into four 1/16ths, etc..
Score/Edit Score 7•25
Advertisement
Table of Contents
