Table of Contents
Advertisement
Save the modifications as a new Drumkit/Sound
Patch file
1. Press F8 («Store...»).
The «Store» dialog window opens:
2. The "File" option is shown selected. Press EN-
TER to confirm.
An insertion zone appears:
The insertion zone shows the Program-
Change and BankSelect MSB (CC00) to
which the new Drumkit/SoundPatch will be
saved.
3. Press ENTER to confirm the current location, or
use the DIAL or numeric keypad if you wish to
select a different location.
4. If you want to change the name of the file, press
the soft button F7 or F8.
5. Insert a name using the method described in the
Data Entry paragraph of Chapter 1 (page 1.4).
Press ENTER to confirm the name and return to
the Store window.
6. Press ENTER to save the new file to the selected
location.
The new Drumkit/SoundPatch is now avail-
able as a RAM-Sound.
As any new RAM-Sound, the new Drumkit/
SoundPatch will remain in memory after
power down. To conserve it and safeguard it
against future cancellation, save it to disk
using the Save Single Sound, Save All Sound
or Save All procedures.
Save the modifications to a Performance
1. Press F8 («Store...»). The «Store» dialog win-
dow appears:
2. Select the Performance option with the cursor
button
and press ENTER to confirm.
The «Drumkit store» dialog window opens:
3. Select the Performance or Style-Performance
option with the / cursor arrows.
4. Rotate the DIAL to select the Performance or Style
Performance Group to store to.
5. Move down to the Perf option with the
button and select the Performance to save to with
the DIAL.
6. Press ENTER to confirm or ESCAPE to cancel.
Edit SoundPatch 15•9
cursor
Advertisement
Table of Contents
