Chapter 2 Getting Started; Installing Batteries; Battery Indicator - Sunwave Tech. SRC-3000 User Manual

Chapter 2 Getting Started

This chapter provides you with the information to quickly
start using the SRC-3000.

Installing Batteries

The SRC-3000 operates on three AAA alkaline batteries (not
included). Batteries must be inserted before you can
operate the SRC-3000.
1. Turn the remote over, push the tab in the direction of
the arrow on the battery cover and lift the cover off.
2. Insert the batteries, matching the batteries to the (+)
and (–) marks inside the battery case.
3. Snap the battery cover back into place.

Battery Indicator

A battery icon is displayed in the upper left-hand corner
above the System Setup Key:
Figure 2: The Battery Low Icon
When the batteries are almost depleted, the battery low
icon appears.
7
Battery low icon