Using Code Learning Mode; Before Using Learning Mode - Sunwave Tech. SRC-3000 User Manual

SRC-3000 User's Manual

Using Code Learning Mode

Follow these instructions to enable the SRC-3000 to detect
and learn a remote control's configuration.

Before Using Learning Mode

Note the following before using the SRC-3000's learning
function: not all infrared codes are learnable by the SRC-
3000. You may need to collect the codes first. To change
from a device that has already been programmed, delete
all of the commands of the first device before teaching
new ones. For example, to operate the living room TV
instead of the bedroom TV, delete all commands for the
bedroom TV first. Then re-configure the TV device screen for
the living room TV.
NOTES:
• Code learning does not work with all devices.
• Select one device screen in advance before
using code learning mode.
• All keys except the Code Setup key, Delete key,
Macro key, and System setup key can be
learned.
18