Erasing Key Codes And Device Codes (Delete) - Sunwave Tech. SRC-3000 User Manual

Erasing Key Codes and Device Codes (Delete)

Follow these instructions to delete key codes or device
codes from the SRC-3000.
1. Press the
seconds to enter the
confirmation screen.
2. Press the four numerical keys
in any sequence to enter the
selection screen. Refer to
page 10.
3. Press and
through the options. Select
the Key or Bank that you
want to erase, and
press
4. If you select
to delete (for example TV). Delete each setting by
pressing any key.
5. Press
automatically.
6. If you select Bank mode, selecting a device key will delete
all settings for the device. Pressing the Device key again
will change to the next page.
NOTE:
Device keys can also save codes. To delete the
codes saved in device keys, press a device key for one
second to delete the saved remote code.
Press
7.
operation.
key for three
to scroll
.
, select a device whose codes you want
to cancel the operation or the SRC-3000 exits
to confirm deletion or
Using Code Learning Mode
to cancel the
21