Chapter 3 Getting Started; Starting The Software; The Interface - Sunwave Tech. RemoteComm SRC-7000 Software User Manual

Chapter 3 Getting started

Read this chapter after you have installed the RemoteComm
software and learn how to operate the interface and use the
basic functions.

Starting the software

Double click the icon on the desktop to start the RemoteComm
software. You can also click the Start button and start the
software from the Sunwave folder in the Start menu.

The interface

A splash screen appears when the RemoteComm software is
started.
When the software is fully loaded, you must confirm the remote
control model you are using.
Starting the software
7