2.2 PLC Ladder Monitor Feature Startup
Either of the following two methods can be used to start the PLC Ladder Monitor feature.
2.2.1 Via the Menu Bar
(1) To call up the GP screen's Menu Bar, simultaneously press the areas marked by (i), (ii) and (iii) (See
below)
(2) After the Menu Bar appears, select [MONITOR].
• If the Device Monitor feature has not been registered correctly, the [MONITOR] button will not
be displayed in the Menu Bar.
SEE
2.1.3 Device Monitor Registration (page 2-2)
(3) [Menu] screen is displayed,touch the [Ladder Monitor] button.
iii
Chapter 2 Operation
ii
i
2-5