Cd Installation; Project File Creation/Running; Device Monitor Registration - Mitsubishi Electric Q Series Operation Manual

Plc ladder monitor

Hide thumbs Also See for Q Series:

Table of Contents

Mistubishi Electric Q Series PLC Ladder Monitor Operation Manual

2.1 Installation

Please perform the following installation procedure prior to using the PLC Ladder Monitor feature.

2.1.1 CD Installation

In Windows Explorer, double-click on the CD's Setup.exe file to start the installer program. Follow the

installer program's directions.

Create a new project file, or run an existing project file.

For project file details,

SEE

GP-PRO/PB III for Windows Operation Manual (Included with the screen editor software)

Starting from the screen editor software's main screen, the procedure for registering the Device Monitor fea-

ture is explained below.

Registering the Device Monitor screen

Select the [Screen / Setup] menu's [Device Monitor] feature.

Click [Add] to register the feature.

• To register the Device Monitor feature, at least 90KB of free GP space must be available. There-

fore, after sending your project to the GP unit, be sure to check that at least 90KB of space is

remaining for this feature.

You can check the amount of GP memory used by your project via the Project Manager's

[Project] -> [Property] screen.

2-2

• Prior to running the installer program, GP-PRO/PB III for Windows Ver. 5.0 or

later screen editor software must be installed on your system.Refer to the section

of the GP-PRO/PBáV for Windows Setup Guide that relates to your unit's OS

Table of Contents