Mitsubishi Electric Q Series PLC Ladder Monitor Operation Manual
1.1 Overview
The PLC Ladder Monitor software enables you to read PLC ladder programs and display them as ladder dia-
grams on the GP unit.
This software operates on the GP unit and the software's boot file is stored in the GP unit's CF Card.
The PLC Ladder Monitor Add-on Kit has the following features:
•
Displays PLC ladder programs as ladder diagrams.
•
Displays power (ON) lines using bold lines.
•
Displays the designated step number.
•
Displays circuit data including the designated device address.
•
Displays circuit data in which the designated device address is included in the output instruction.
•
Displays ladder program comments.
•
Calls the Device Monitor feature.
•
Use the Device Monitor feature to set, reset or change the value of an arbitrary device.
• The Device Monitor feature is not explained in this manual. For information on how to operate
this feature,
GP-PRO/PBIII for Windows Device/PLC Connection Manual (Included with the screen editor soft-
SEE
ware).
1-2