Project Transfer; Copy Boot File To A Cf Card; Insert The Cf Card Into The Gp; Connect The Gp To The Plc - Mitsubishi Electric Q Series Operation Manual

Mistubishi Electric Q Series PLC Ladder Monitor Operation Manual

2.1.4 Project Transfer

Next, transfer the project to the GP unit.
For project transfer details,
SEE GP-PRO/PB III for Windows Operation Manual (Included with the screen editor software).

2.1.5 Copy Boot File to a CF Card

Insert a CF Card into your PC's CF Card reader and copy the Ladder Monitor boot file to the CF Card's root
directory.
The boot file is located in GP-PRO/PB III for Windows screen editor software's [PROTOCOL] folder.
Mitsubishi Electric's Q Series Ladder Monitor boot file filename: MEL_QP.SYS
To copy this program to a CF card, the card must have at least 2MB or more free space.

2.1.6 Insert the CF Card into the GP

Remove the CF Card from your PC's card reader and insert it in the GP unit's CF Card socket.
For CF Card socket insertion details,
SEE
Your GP unit User Manual (Separately sold).

2.1.7 Connect the GP to the PLC

Connect the data transfer cable between the GP and the PLC.
For cable connection details,
SEE 1.1.1 System Design (page 1-3)
GP-PRO/PB III for Windows Device/PLC Connection Manual (Included with the screen editor soft-
SEE
ware)
2-4