Westinghouse WH4500 Owner's Manual page 17

4. Install the mounting foot to the frame using M6
fl ange bolts and nuts.
Figure 12 – Assemble Mounting Foot to Frame
1 - Rubber Pads
2 - Mounting Foot
5. Install the 16 mm x 105 mm axle pin through the
axle bracket on the frame.
6. Install the hairpin cotter through the axle pin.
Figure 13 – Assemble Wheels to Frame
1 - Axle Pin
3 - M6 Flange Bolt
and Nut
2 - Hairpin Cotter
ASSEMBLY
7. Install the handles using the clevis pin and hairpin
cotter as shown in Figure 14.
Figure 14 – Attaching the Handles
1 - Clevis Pin
2 - Handle
3 - Hairpin Cotter
17