Operation; Power; Framing Shutters; Focus And Zoom - Chauvet LFS-5 User Manual

4. O
PERATION

Power

Framing
Shutters

Focus and Zoom

Gobos

Color Gels

Page 10 of 14
To turn on your LFS-5, simply plug in the including power cord to the back of the product
and plug the opposite end to the wall outlet. To turn it off, unplug the power from the wall
outlet.
To control the shape of the beam from the LFS-5, use the framing shutters on all sides
of the product. The left framing shutter controls the right side of the light, the top framing
shutter controls the bottom of the light and vice versa. Push the framing shutters in and
out depending on the size and shape of the beam that you desire.
To control focus and zoom, move the internal lenses at the front of the unit until you get
the desired focal point and zoom length.
To install a gobo into the LFS-5, unscrew the knob as shown in the Product Description
(page 5). Place the gobo into the holder and screw the gobo holder back into place.
Your chosen gobo will now display. To change the shape of the gobo, simply use the
framing shutters to select the size and shape of the gobo that you desire.
To use a color gel (not included), simply place the gel in the front of the product, as
shown in the Product Description (page 5). Your desired color will now show.
LFS-5 User Manual (Rev. 08)