Introduction - LG ARNH963K2A2 Installation Manual

Hydro Kit Models
This manual describes how to install the Multi V™ Hydro Kit. The Hydro Kit is available in two models. Refer to Table 1 for model chassis,
model number and capacities.
Table 1: Hydro Kit Model Numbers and Capacities
Unit
Hydro Kit Medium Temperature
Hydro Kit High Temperature
These units are to be used in conjunction with LG's Multi V Variable Refrigerant Flow (VRF) Heating, and Air Conditioning system. Both units
operate on 208–230 V, 60 Hz, 1-phase power.
Install these unit(s) in the location(s) specified by your design engineer, HVAC system layout drawings and project specifications. Perform the instal-
lation according to the procedures in this manual. Improper installation may result in injury to or death of personnel, equipment malfunction and/or
property damage.
More in-depth technical and performance information on these units is available in the Multi V™ Hydro Kit Engineering Manual available at
http://www.lg-vrf.com.
HydroKit Medium temperature (K2)
Chassis name
K2
K3
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Model number
ARNH963K2A2
ARNH763K3B2
HydroKit High temperature (K3)

INtroDuctIoN

Capacity
Cooling: 95,900 Btu/h
Heating: 107,500 Btu/h
Heating Only: 86,000 Btu/h
9