Function Codes - Hydro Kit Medium Temperature - LG ARNH963K2A2 Installation Manual

Hydro kit medium temperature (k2) btu/h 107,500; hydro kit high temperature (k3) btu/h 86,000
Hide thumbs Also See for ARNH963K2A2:
Table of Contents

Advertisement

Pre-coMMIssIoNING

Function Codes - Hydro Kit Medium Temperature

temperature range setting for Hydro Kit Medium temperature
The following Functional Codes are available for the Hydro Kit Medium Temperature.
function Code 11 - Setting Air Temperature in Cooling Mode
Set air temperature range in cooling mode.
Setting is only available when Remote Air Temperature Sensor is connected.
• Install PQRSTA0 (Remote Air Temperature Sensor).
• Set Function Code 03 properly.
function Code 12 - Setting Leaving Water Temperature Cooling Mode
When Leaving Water Temperature is chosen, determine cooling setting temperature range.
Moisture on the floor can occur
• Keep Leaving Water Temperature higher than 60°F when unit is operating in cooling mode. If not, condensation will occur on the floor.
• If floor is in a humid environment, do not set leaving water temperature below 64°F.
Water condensation on the radiator
• Cold water might not flow to the radiator, while unit is operating in cooling mode. Condensation on radiator may occur if cool water enters into
the radiator.
function Code 13 - Setting Air Temperature in Heating Mode
Determine heat temperature setting range when air temperature is selected as setting temperature.
Setting is only available when Remote Air Temperature Sensor is connected.
• Install PQRSTA0 (Remote Air Sensor).
• Set Function Code 03 properly.
function Code 14 - Setting Leaving Water Temperature in Heating Mode
When Leaving Water Temperature is chosen, determine heating setting temperature range.
function Code 15 - Setting Leaving Water Temperature in Heating Mode
When Leaving Water Temperature is chosen, determine heating setting temperature range.
Setting is only available when DHW Tank temperature sensor is installed.
• Install DHW tank and DHW tank kit.
• Set DIP Switch #2 and #3 properly.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
62

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Arnh763k3b2

Table of Contents