Water circuit Piping
Guidelines
1. Cap pipe to avoid dust or debris entering the piping.
2. Prior to welding or cutting of piping, check for defects. Check to see there are no slags or burrs inside pipe before installing.
3. Treat pipe threads with joint compound or Teflon tape to prevent leakage.
Temperature
PT Service Port
(For Cleaning
Heat Exchanger)
The Hydro Kit has a factory internally mounted Flow Switch.
Figure 18: Hydro Kit Piping Installation
Water Inlet
Pipe
Gate Valve
Pressure
Gauge
Gauge
Strainer
(50 Mesh)
Gate Valve
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
Water Outlet
Pipe
Water Balancing Valve
Dielectric
Pipe Union
Refrigerant Pipes
Dielectric
Pipe Union
rouGHING-IN
Water Piping
27