Advertisement
SPECIFICATIONS
Without automatic
thread trimmer
Model name
With automatic
thread trimmer
Stitch system
Stitch pattern
Max. sewing speed
Max. zigzag width
Max. feeding amount
Lift of the presser foot
Hook
Thread take-up
Lubrication
Lubricating oil
Needle (at the time of delivery)
Needle position changing mechanism
Reverse feed stitching mechanism
Needle throw pattern cam
sti/min stands for Stitches per Minute.
WHEN YOU PLACE ORDERS
Please note when placing orders, that the model name should be written as follows:
LZ-2280A series (without automatic thread trimmer)
L Z2 2 8
Type
Standard wider zigzag (with a gauge for 5mm zigzag width)
Standard wider zigzag (with a gauge for 8mm zigzag width)
Standard/3-step zigzag
Standard/3-step zigzag (with anti-material-slip type)
3-step zigzag / scallap
LZ-2280A-7 series (with automatic thread trimmer)
L Z 2 2 8 4 A 7 WB
Type
Code
Wiper and automatic reverse feed function
Wiper
Standard /
4A
3-step zigzag
Provided
To order, please contact your nearest JUKI distributor.
SEWING MACHINERY BUSINESS UNIT
✽ Specifications and appearance are subject to change without prior notice for improvement.
✽ Read the instruction manual before putting the machine into service to ensure safety.
✽ This catalogue prints with environment-friendly soyink on recycle paper.
LZ-2280A ( A )
—
Standard zigzag
5 mm
2.5 mm
Triangular cam
Code
0AA
Not provided
0AB
without automatic reverse feed function
4A
with automatic reverse feed function
"0B" is applied only to LZ-2284A and 2284AT
4AT
"0B"and "00" are Direct-Drive head
7A
Automatic reverse feed function
Code
Provided
WB
2-11-1
, TSURUMAKI, TAMA-SHI,
206-8551
TOKYO
, JAPAN
PHONE : ( 81 ) 42-357-2254
FAX : (
81
) 42-357-2274
http://www.juki.com
LZ-2280A ( B )
—
Standard wider zigzag
Standard / 3-step zigzag
5,000 sti/min
8 mm
5 mm
By hand: 5.5 mm, By knee: 10 mm
DP hook (with titanium-treated inner hook)
Rotary type
Fully automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
134SUK (Nm70)
Provided as standard
Provided as standard
Automatic reverse feed function
Auto-lifter
Code
Not provided
Provided
AK
LZ-2284A
LZ-2287A
LZ-2284N-7
3-step zigzag / scallap
5 mm (standard)
10 mm (3-step)
2.5 mm
Grooved cam
Control box
S C - 9 2 0 A
Operation panel
Code
C P 1 8 A
00
C P 1 8 0 A
0B
Juki Corporation operates an environmental management system
to promote and conduct the following as the company engages in
the research, development, design, sales, distribution,and
maintenance of industrial sewing machines, household sewing
machines, industrial robots, etc., and in the provision of sales and
maintenance services for data entry systems:
(1) The development of products and engineering processes
that are safe to the environment
(2) Green procurement and green purchasing
(3) Energy conservation (reduction in carbon-dioxide emissions)
(4) Resource saving (reduction of papers purchased, etc.)
(5) Reduction and recycling of waste
(6) Improvement of logistics efficiency (modal shift and
improvement of packaging, packing, etc.)
SEPTEMBER, 2013 Printed in Japan(C)
—
10 mm
2.5 mm
Advertisement
