Settings/Dmx; Settings/Display; Lock Fixture; Password (Passpin) - Philips Showline SL NITRO 510 Installation And User Manual

Installation & User's Manual
Load Factory

Settings/DMX

DMX configuration options are available in the DMX menu.
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the fixture's DMX
settings. When finished, press the Check button to exit the menu level. The adjustable parameters are described in
Table 8.
DMX Enable
Address
Map
When no DMX

Settings/Display

Options of the fixture's LCD display can be adjusted in the Display menu.
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the fixture's DMX
settings. When finished, press the Check button to exit the menu level. The adjustable parameters are described in
Table 9.
Flip Display
Off Time
Language Select

Lock Fixture

You can lock all fixture functions, requiring a PIN code to access the menu functions. When you select this menu
item, you are asked to confirm that you wish to lock the fixture. Once locked, all menu items can only be accessed by
entering one of the three PIN codes assigned in the Settings/Security menu. (see
more information). The PIN code used to unlock the fixture will only unlock the functionality assigned to that
particular PIN code.
Note: When the fixture is powered off, the Lock Fixture function will be disabled. To assign fixture power-up
security refer to (see

Password (PassPIN)

The Password menu item will display an Enter PassPIN dialog box. Use the Up Down Left Right buttons to enter a
PIN code matching the codes assigned in the Settings/Security menu to toggle the current security level.
2 0
OPERATION AND PROGRAMMING
Table 7: Factory Default Parameters
Parameter
•
•
Table 8: DMX Setting Parameters
Parameter
•
•
Assigns the fixture's DMX start address.
Selects the DMX map for the fixture to use (see
information).
Selects the action of the fixture when the unit is powered ON and not receiving DMX.
•
•
•
•
Table 9: LCD Display Parameters
Parameter
•
•
•
Assign a time for the display to automatically turn off after the last button press. A value of
ON will leave the display on indifferently.
English is the only language currently supported.
"Settings/Security" on page 18
SL NITRO 510 LED STROBE Luminaire
Description
No - no action.
Yes - restore to factory default menu settings.
Description
Enable - Fixture will respond to DMX commands/signals.
Disable - Fixture will ignore DMX commands/signals.
Off - Turn off all LED output.
Last Action - restore the last menu action.
Power-up - follow the power-up value in the settings menu.
Hold - continue with the last DMX values received.
Description
Yes - The display will be inverted.
No - The display will not be inverted.
Auto - The display will automatically invert depending upon fixture orientation.
for more information).
DMX CONTROL section for more
"Settings/Security" on page 18
Sh wline
for